Top Best Heat Pump Pool Heater Review Guide For 2023
Top Best Heat Pump Pool Heater Review Guide For 2023 – What is the best swimming pool heat pump? Which heat pump heater works almost as effective as electric heat and natural gas pumps? Unlike a solar pool heater which directly generates heat, a heat pump captures heat, making it a better cost-effective pool heating system.
However, the best heat pump pool heater costs a fortune upfront, so you need to be careful when picking one. Lucky for you, you are in the right place to find the perfect heat pump pool heater for your swimming pool. To see them keep reading our Top Best Heat Pump Pool Heater Review Guide For 2023.
Hayward W3HP21004T 95,000 BTU Pool Heat Pump
This Hayward HeatPro heat pump is engineered with reverse flow titanium heat exchangers to ensure a persistent and top-notch performance, even in discourteous conditions.
The featured corrosion-proof Ultra Gold evaporator sheet is incorporated for extreme durability, most especially in marshy environments. It has a very quiet sliding compressor to reduce sound during operation.
This product comes with strong panels, resistant to UV rays, rust, and damage. The stainless steel fittings are corrosion-resistant to extend the life of the heater. The Polyethylene screen safeguards the evaporator coil and ensures maximum efficiency.
Product Details:
- Acoustic compressor cover and profiled fan blade ensures quiet operation and efficient performance
- Ultra-Gold corrosion resistant evaporator fin for extreme durability especially in coastal environments
- Titanium heat exchanger designed for maximum heat transfer, efficiency and reliability
- Durable injection molded UV-resistant body panels that are impervious to rust and deterioration
- 2in x 2 1/2in CPVC Union Plumbing Connections – Common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
Pros:
- Features corrosion-proof stainless steel hardware
- Ultra-Gold evaporator ensures durability
- Comes with titanium heat exchanger
- The scroll compressor reduces the sound level
Cons:
- Their consumer policies are antiquated
FibroPool FH 220 Swimming Pool Heater
This is yet another durable heater heat pump from the reputable FibroPool brand. The model requires 240v to operate, meaning that it might use more power than the FH120 model.
It is recommended for all hot tubs, pools, and other areas that you might require to warm the water. Actually, it is able to heat a pool of up to 7,500 gallons in warm weather.
The model comes with a BTU rating of 20,000 and won’t cost you much when buying it. Besides, it’s one of the cost-effective models on this list when operating.
Another notable thing about this model is the ease of installation. You can easily put it up by yourself.
Product Details:
- 4.85 COP. Best in its class
- 20,000 Btu/Hr. heating capacity
- Suitable for pools up to 7,500 gallons in coastal climates
- Suitable for ALL Hot Tubs
- 240 Volts- 60 HZ American Voltage
Pros:
- Ideal for all hot tubs
- Best in its class
- Easy to install
Cons
- Uses a lot of power
FibroPool FH055 Durable Swimming Pool Heat Pump
This FibroPool FH055 is uniquely made with 100 percent titanium heat exchanger and swift disassemble pipe, which is 1 ½ PVC 230 to 240 power voltages 60 Hz.
This item is an energy-efficient 25 cents per hour, an ideal option for swimming pools with up to 13500 gallons of water in a calm-humid climate.
Another notable feature of this fantastic product is the 80% air humidity, 82’F set swimming pool temperature, and 80’F air temperature. This FibroPool FH055 is less expensive to procure compared to some other products on the market.
Product Details:
- ** Our Most popular FH 55 model Heater Efficiency: 580%
- **230 volts- 60 HZ for USA/ Canadian/ Mexican electricity
- ** Suitable for pools up to 13’500 gallons** (Please read Item description for more details about sizing)
- ***In Ground/ Above Ground/ Chlorine/ Salt Water pools
- **Pure Titanium heat Exchanger… 1 1/2″ Hard Pvc pipe connections- Compression type.
Pros:
- Features 100% titanium heat exchanger
- It conserves much energy
- Comes with digital display
- Suitable for pools with 13500 gallons
Cons:
- Has a complicated wiring system
FibroPool FH055 High Power Heater for In-ground Swimming Pool
This FibroPool is designed with a sleek design, slim profile, and weather-proof case to give room for various placement configurations. The easy side accessibility to the set up enhances the installation time and reduces hassle.
It features enamel-coated cases for heavy-duty usage every season. The slim profile measurement is 16x40x24, which provides a broad mounting options. It is powered by clean electricity that minimizes the harsh effect of the conventional gas powered heat pump.
This device will make sure you have convenient swimming conditions with a pleasant temperature of 40-degree Fahrenheit that prolongs your swimming by months.
Product Details:
- 100% Titanium heat exchanger
- Quick disconnect piping, 1 1/2″ pvc and 17 Amps power-220 volts
- Digital display and controller
- 16″ x 40″ footprint, slim fit
- US Department of Energy top Energy Efficient System, 25 cents per hour
Pros:
- Features enamel-coated case for durability
- Easy and quick to install
- Comes with easy set digital for quick adjustment
Cons:
- Has no installation guide or user manual
FibroPool FH120 Above Ground
FibroPool FH120 is a great pool heat pump that is recommended for above ground pool. It requires 120v to operate and heat your pool to the desired temperature within a short time.
The model has a built-in 8 feet long power cord that will match all the USA standard plugs. Hence, you won’t need to buy additional attachments when installing your pool heat pump.
This particular pump can heat a swimming pool of up to 7500 gallons in warm climates. It is also an affordable product that will be cost-effective when operating.
Product Details:
- 120 Volt, 60Hz, 10A draw
- Built in 8 foot long power cable with standard USA plug
- Suitable for pools up to 7500 gallons in coastal climates
- Plug into an GFCI protected outlet
Pros:
- Ideal for an above ground pool
- Heats the pool pretty fast
- Cost-effective when operating
Cons:
- Should be plugged into a GFCI protected socket
AquaPro PRO1100 Swimming Pool Heat Pump
The AquaPro Pro1100 Swimming Pool Heat Pump is made of 100% commercial quality titanium that provided resistance to cavitation, impingement attack, and erosion. Hence, it is a durable product that will warm your pool for decades.
It features electronic temperature controllers with diagnostic codes and LED readout to troubleshoot and notify you of any problem. Another thing, the heat pump comes in a UV-resistance cover that won’t fade and is non-corrosive.
With 2” PVC unions, the model provides you with an easy time when installing and winterizing. It also comes with a one-year warranty that guarantees your durability.
Product Details:
- 100% commercially pure titanium used in all heat exchangers, for superior resistance to erosion, cavitation and impingement attack
- Dual electronic temperature controller with LED readout and diagnostic codes for troubleshooting
- UV protected enclosure that is non-corrosive and won’t fade
- 2″ PVC unions for easy installation and winterization
- 1-year warranty
Pros:
- Diagnostic codes
- Easy to install
- Made of high-quality material
Cons:
- One year warranty
Pentair 460933 UltraTemp
This is the right model for inground pool and offers environmental friendly operation. Thus, you will enjoy the quiet operation of the model while you swim in warm water.
It is able to transfer the heat from the air to your pool within minutes to raise the water temperature. What is so amazing about this model is the ability to save energy cost by up to 80% when compared to gas heaters.
Plus, it is one of the few pool heat pumps that use the latest technology to assure safe operation. So, if you want a pool heat pump heater that will be effective and cost-friendly, this is the model for you.
Product Details:
- 60-Hertz frequency, 50-ampere breaker size, single phase, 230-Volts and 8-feet wire, 108000-BTU
- Compatible with all automated control packages
- 100 percent pure titanium heat exchanger assures corrosion-free performance
- Automatic defrost feature senses refrigerant temperature and prevents ThermalFlo from freezing; it allows the heat pump to operate at lower temperatures
- Measures 43-inch length by 50-inch height by 34-inch width
Pros:
- Saves up to 80% power
- Friendly to the environment
- Very efficient in heating pools
Cons:
- Costly when buying
Hayward HP31204T HeatPro Titanium
Hayward is a leading heat pump manufacturer who has been in business for decades. It provides some of the best heat pumps on the market and one of these units is the HP31204T.
This model has profiled fan blade that makes the heat pump to be effective when operating. It also boasts of an acoustic compressor cover that ensures quiet operation – you can run it day or night.
The model is quite durable thanks to the ultra-gold rust-free evaporator fin and the injection molded UV-protected body panels. This means that your heat pump heater will offer you years of service and value for your money.
Another notable feature of the model is the titanium heat exchanger that allows it to transfer maximum heat.
Product Details:
- Acoustic compressor cover and profiled fan blade ensures quiet operation and efficient performance
- Ultra-Gold corrosion resistant evaporator fin for extreme durability
- Titanium heat exchanger designed for maximum heat transfer, efficiency and reliability
- Durable injection molded UV-resistant body panels that are impervious to rust and deterioration
Pros:
- Comes from a reputable brand
- Offers service for years
- Very efficient when operating
Cons:
- Limited warranty
Top Best Heat Pump Pool Heater Buyers Guide For 2023
How Pool Heat Pumps Work:
Pool heat pump tech has been in use for decades and is slowly gaining popularity. If it is something that you are not familiar with, we will teach you how it works.
The pool heat pump cools or warms water that passes via the heater like electric, propane, or natural gas pool heater. Its cools or heats the water using energy from the environment as it is taken via the evaporator coil.
The liquid material helps to convert the absorbed heat into a gas that is fed via the compressor. This super-heated gas then gets into the condenser where it helps to heat the water from your pool and take it back at a higher temperature.
This process is repeated many times and very little energy is required other than the air.
Sizing Pool Heat Pump:
You will need to do a few calculations when sizing your pool heat pump and know the weather patterns in your location. The aim is to determine the number of BTU’s you will require during the coldest days of the year.
You can use the following formula:
Pool Area x Temperature Rise x 12 = Required BTU’s per hours.
Note the following:
- Temperature Rise = Air Temperature – Desired Temperature of Your Pool
- Air Temperature should be the monthly average.
- Add about 10% BTU rating to the model you wish to buy to ensure that you have enough heat.
Pros and Cons of Pool Heat Pump:
It is important to know the pros and cons of a pool heat pump before you buy one. This will give you an idea of what you are getting yourself into and help you to make an informed decision.
Pros
- Ideal for daily swimming.
- Cheap to operate.
- Most efficient pool heater.
- No emissions and eco-friendly.
- Lasts for over 20 years.
- Best way to cool your pool down.
Cons
- Expensive to buy.
- Only effective in 50 degrees or higher.
- Very slow when heating the pool.
Frequently Asked Questions:
Q: What is a heat pump pool heater?
A: Heat pumps pool heaters utilize electricity to collect heat and transfer it from one location to another; while the pool pump disperses to the pool water. The water gathered from the pool passes through the filtration system and the pump heater.
Q: How much does it cost to run a heat pump pool heater?
A: Pool heat pump heater consume less energy to produce more heat than gas heating methods. The operating costs of the pool heat pump vary depending on the pool water temperature setting and efficiency. The average running is $. 16 cents per kilowatt-hour.
Pool Heat Pump Winterizing:
This is something that you should do to ensure that your pool heat pump lasts for decades. It involves removing all water and fittings from the plumbing and heater just like the way you remove the pool with a pressure generator or shop vac.
You should also use a pool heat pump cover to protect your heat pump from snow, rain, and other harmful elements.
Conclusion:
We hope that you can now visit the market and get yourself the best heat pump pool heater for your swimming pool. We have reviewed the top models on the market today. Thanks for taking the time to read our Top Best Heat Pump Pool Heater Review Guide For 2023.
