Top Best Boat Launching Wheels Review Guide For 2023
Top Best Boat Launching Wheels Review Guide For 2023 – If you’re looking for a convenient way to get your boat to the water, a set of launching wheels is a great idea. Inflatable boats can be very heavy, especially when packed with gear or when they have a motor attached. With the best boat launching system, you won’t have any problems moving the boat around, even if it’s fully loaded.
Various types of launching wheels exist, and selecting the right set depends on your boat, the terrain, and how much money you are willing to spend. Take a look at the top rated boat launching systems we carefully picked for you, with plenty of strength to transport your vessel smoothly over any surface. To find out even more keep reading our Top Best Boat Launching Wheels Review Guide For 2023.
Seamax Portable Boat Launching Wheels
Thanks to their easily-adjustable frame, Seamax portable boat launching wheels perfectly fit almost any boat up to 13 feet long. Unlike most other models, Seamax wheels don’t require any drilling or installation – they work as a dolly that you simply slide under your boat.
Not only are these great for inflatables, but their construction also allows you to use them as boat wheels for aluminum boats. The side bunks in the rear are flexible, making sure your boat stays stable and secure. And, on top of all this, the combination of a steel frame and high-pressure tires guarantees a smooth ride.
Product Details:
- This lightweight adjustable universal boat hand dolly is equipped with a retracted main pole from 8′ to fully extended 10′, angle flexible rear bunks, and position adjustable front bow support bunk to carry the boat. The boat hand dolly weighs about 45 Lbs including two 16” Pneumatized wheels. The disassembled boat hand dolly can be fit into an easy carrying box with approximate 50″ x 46″ x 9″ dimensions.
- Seamax Boat Hand Dolly is made by steel with power coating. Quick released lock pin to change the dolly tongue stages: 8ft, 9ft and fully extended 10ft. Rear Bunks Width 38”. Dolly Payload 250 Lbs for boat and motor. Suggested tire air pressure is 15 PSI, max 20 PSI. It is good for an inflatable boat up to 13ft, an aluminum or fiberglass boat up to 14ft, and a small sail boat up to 15ft.
- Optional hitch attachment is available for off-road towing with an ATV, golf cart, and other utility vehicle. Max towing speed is 10km / hour. It is great for launching your boat to the water quickly. 10 minutes to assemble or disassemble. This product has been selling to many many places including sail club or yacht club.
- Tire inflation: Dolly tires may not be fully inflated when shipping. Give only 15-20 PSI max air pressure in room temperature before using. Best to use portable type digital control air pump to avoid over inflation issue.
- The boat hand dolly is suitable for many use cases. For example, carry your boat from the parking lot to the boat launching lane in a park. Carry your boat from your backyard to the water. Move your boat within the yacht club or sail club. Users shall check the max pay load (250 Lbs) and speed (10 KM/Hour) requirements. The boat hand dolly is NOT for regular road / highway use. Boat hand dolly user cannot tow this hand dolly on the road or highway by vehicle for any of purposes.
What Makes These Boat Launching Wheels Stand Out:
- Designed as a launching dolly that goes under the vessel
- Adjustable length to fit various boat sizes better
- Powdered steel frame for increased corrosion-resistance
- Safe for towing (up to 10 kilometers per hour)
MODEL & ACCESSORY SPECS:
- Capacity: 250 pounds
- Dolly Size: 8 to 10 feet (length) x 38 inches (width)
- Tire Size: 16 inches (diameter)
- Tire Type: Inflatable (15-20 PSI)
BRIS Inflatable Boat Launching Wheels
Made from anodized aluminum, BRIS inflatable boat launching wheels are an excellent option to use in an ocean environment (they won’t corrode). The frame also provides excellent weight capacity (300 pounds), allowing you to use them safely even with a loaded boat.
To make the ride smooth, BRIS inflatable boat launching wheels come with large 15-inch inflatable tires. They are 4 inches wide, significantly reducing the chance of getting stuck in the sand. As for installation, the brackets are well-designed and come with all the required hardware. Lastly, you can easily swivel the wheels up and down using the quick-release pins.
Product Details:
- wheels size 15” in diameter and 4″ in width , bracket size see photos
- Recommended max. weight: 300 Lbs.
- Max tire pressure: 14 psi
- Shipping weight: 15 Lbs
What Makes These Boat Launching Wheels Stand Out:
- Anodized aluminum frame resists damage from water
- Pneumatic tires work equally well on grass, sand, and dirt
- Quick-release pins for swiveling and detaching the wheels
- All the installation hardware is included in the package
MODEL & ACCESSORY SPECS:
- Capacity: 300 pounds
- Arm Length: 24 inches
- Bracket Size: 12 x 3 inches
- Tire Size: 15 inches (diameter) x 4 inches (width)
- Tire Type: Inflatable (up to 14 PSI)
BRIS Stainless Steel Boat Launching Wheels
If you’re after a more budget-friendly option that still has plenty of strength, Bris stainless steel wheels are the ones for you. As the name suggests, the entire frame is made of high-quality steel (both the brackets and the arms).
The tires measure 10 inches in diameter, meaning they are slightly smaller compared to most other models. They are solid (no inflating required), and have a very decent grip regardless of surface. While these aren’t the fanciest wheels on the market, they are easily the best option if you want the best value for the price.
Product Details:
- Recommended max. weight: 136 kgs.
- Solid tires size: 10” x 3 ”
- Stainless steel bracket width : 35 mm
- Shipping weight: 5 kgs
- CAUTION: The launching wheels is not designed to be towed behind a vehicle.
What Makes These Boat Launching Wheels Stand Out:
- High-quality stainless steel brackets and arms
- Solid tires that can’t be punctured or damaged
- Pins for locking the wheels in an upright position
- Great weight capacity considering the wheel size
MODEL & ACCESSORY SPECS:
- Capacity: 300 pounds
- Arm Length: 15.75 inches
- Bracket Size: 5.9 x 3.35 inches
- Tire Size: 10 inches (diameter) x 3 inches (width)
- Tire Type: Solid
Seamax Deluxe 4 by 4 Boat Launching Wheels
Seamax Deluxe 4 by 4 boat launching wheels are probably the best-designed model that you’ll come across. The brackets and arms are made from the strongest T6 aluminum alloy, with anodized coating throughout. This, combined with the stainless steel hardware, gives these wheels a weight capacity of staggering 600 pounds.
Another detail we really like is that the arm length is easily adjustable (with 2.5-inch increments). Furthermore, the joint allows you to lock the arms in four different positions. The tires are inflatable up to 20PSI, with enough firmness for any surface. While the price is a bit higher, Seamax Deluxe is worth every dollar.
Product Details:
- Designed by Seamax and now it is the 2nd edition released in 2019. Seamax Deluxe Boat Launching Wheels system is made by the marine grade T6 aluminum alloy with CNC processing and shiny looking anodized coating against the corrosion. Thus the product is good for saltwater use. Small parts are all made by solid stainless steel and reinforced Nylon. The air filled tire is lab-tested (1000 LBS), and is great to support a MAX loading of 600 LBS in all condition.
- BENEFIT of its new design – With the 4 stages of length and 4 wheel arm position, the dolly can be adjusted while afloat in the boat, leaving or coming into the dock. The dolly system can also bring different performance positions for boat launching. The wheel arm length increment is 2.5” per stage. Plus the wheel’s diameter, the range of length is 23 – 30 inches. It is a great add-on for inflatable, aluminum and fiberglass boats.
- The wheel arm has 60° and 90° locking position to move up and down. The upper-60° position can free up more space on the top and side of the transom. The lower 60° position lets the wheels run at the same level as the prop, and thus turns the wheels as a prop guard when boat launching.
- The transom bracket installation area is about 8 x 3 inches. Shorter transom bracket design brings more possible installation for all type of boats with different transom. The brackets can be installed at the waterline top position, so to avoid the water comes into the screw holes. We had developed a profile for the transom bracket in 2019. Now the bracket only requires 2 bolts to install. Easier to put it on your boat with the same loading capacity.
- TRIPLE heavy duty, TRIPLE quality made! Product is made by Seamax Canada with 2 years limited warranty and 100% Customer Satisfaction guaranteed! The Quick Operation Features of the Deluxe Boat Dolly include – spring load locking pin for wheel arm position adjustment; solid spring load buttons for wheel arm length adjustment; and quick released lock pin for wheel arm and wheel bearing.
What Makes These Boat Launching Wheels Stand Out:
- Highest load capacity (up to 600 pounds)
- Adjustable arm length for various surfaces
- Four lockable swivel positions
- 2-year warranty and customer satisfaction guarantee
MODEL & ACCESSORY SPECS:
- Capacity: 600 pounds
- Arm Length: 23 to 30 inches (adjustable with 2.5-inch increments)
- Bracket Size: 8 x 3 inches
- Tire Size: 12 inches (diameter) x 4 inches (width)
- Tire Type: Inflatable (15-20 PSI)
Aquos Aluminum Transom Boat Launching Wheels
Simple design and easy installation are the main reasons why Aquos boat launching wheels gained their popularity. The bracket is strong and comes with pre-drilled holes, as well as all the necessary hardware to mount it on your boat. Every element of the frame is made of anodized aluminum, making sure it won’t corrode easily.
As for the tires, they inflate up to 14 PSI and give you a very smooth ride. When not in use, the wheels are easily locked in the upright position. Because of all this, Aquos wheels are perhaps one of the best boat launching systems if you want something straightforward with a reasonable price.
Product Details:
- wheels size 15” in diameter and 4” in width
- bracket size see the photos.
- Recommended max. weight: 300 Lbs.
- Max tire pressure: 14 psi
What Makes These Boat Launching Wheels Stand Out:
- Anodized aluminum frame won’t corrode from saltwater
- Quick-release pins allow the wheels to swivel up and down
- Large inflatable tires perform well on soft surfaces
- Corrosion-resistant hardware included in the package
MODEL & ACCESSORY SPECS:
- Capacity: 300 pounds
- Tire Size: 15 inches (diameter) x 4 inches (width)
- Tire Type: Inflatable (up to 14 PSI)
Davis Instruments Wheel-A-Weigh Standard Boat Launching Wheels
Davis Instruments Wheel-A-Weigh boat trolley wheels are made of stainless steel that provides greater durability compared to other models. On top of this, the 10-inch inflatable tires are designed for all terrains and won’t get damaged or punctured easily.
Brackets are mounted on the transom and come with all the necessary hardware. Of course, they allow pivoting, so you can lock the wheels in several different positions. The wheel mount is wide, meaning that it won’t interfere with the motor. As a bonus, this also helps improve weight distribution.
Product Details:
- Product Type:Fishing Equipment
- Item Package Weight:4.105 Kilograms
- Item Package Dimension:10.414 cm L X30.48 cm W X59.182 cm H
- Country Of Origin: China
What Makes These Boat Launching Wheels Stand Out:
- Tough frame made of 316 stainless steel
- Precision-molded with non-corrosive wheel hubs
- Package comes with steel hardware
- All-terrain tires for a smoother ride
MODEL & ACCESSORY SPECS:
- Capacity: 220 pounds
- Tire Size: 10 inches (diameter)
- Tire Type: Inflatable
Davis Instruments Wheel-A-Weigh Extra Duty Boat Launching Wheels
If you need something stronger to support a heavy boat, Davis Instruments Wheel-A-Weigh Extra Duty wheels can stand up to the task. They come with a reinforced 316 stainless steel frame that easily holds up to 330 pounds. Of course, this makes the frame on this one very durable and highly resistant to corrosion too.
The wheels come with pivoting brackets that make lifting and locking them very simple. As for the tires, they are fairly large and measure 14 inches in diameter. The traction is very good too, guaranteeing that you can transport your boat easily regardless of the surface.
Product Details:
- AFFORDABLE PARTS
What Makes These Boat Launching Wheels Stand Out:
- Pivot bracket makes lifting and lowering the wheels easy
- High-quality frame made of 316 stainless steel
- Extra-large wheels conquer any hard or soft surface
- Easy installation with instructions and provided hardware
MODEL & ACCESSORY SPECS:
- Capacity: 330 pounds
- Tire Size: 14 inches (diameter)
- Tire Type: Inflatable
Top Best Boat Launching Wheels Buyers Guide For 2023
How To Choose The Best Boat Launching Wheels:
Wheel Size and Tires:
Generally speaking, most launching wheels have between 10 and 15 inches in diameter and are 2 to 4 inches wide. Larger wheels with deeper treads are better on surfaces like sand or dirt. Also, if you know you’ll be moving your boat across rough terrain, they are worth giving a thought. Otherwise, smaller and cheaper wheels may suffice.
The tires are usually made of rubber and can be solid or inflatable, both have some ups and downs. Most products in our boat launching wheel reviews have inflatable tires, which allow high PSI and have a good performance.
Boat Size:
All boat wheels have a maximum weight capacity. While on some models this number is very high, they are still made for inflatable boats or smaller vessels made from aluminum or fiberglass. If you need to transport a larger boat, boat trailers are a better option.
This being said, some launching wheels are mounted on the boat transom using brackets, while others are designed more like dollies. Both have their limitations when it comes to transom height or overall boat length, so pay attention to these parameters before buying.
Material:
The frame (usually the bracket and wheel arms) needs to be made from materials that can handle being exposed to saltwater. Otherwise, it could quickly corrode. In this regard, the best boat launching wheel set will be made from either stainless steel or anodized aluminum.
This way you know the wheels are going to be fairly durable, at least when it comes to water-resistance. As we’ve mentioned, the wheels themselves are made of rubber. If they are inflatable, inform yourself about the pressure and rubber quality, and get a model that won’t puncture the first time you hit a rock.
Installation:
Installing boat wheels is usually not difficult. In some cases, the boat will have markings on the transom where you should drill the bracket holes. If not, carefully measure everything, mark the spots, and drill them yourself. Be mindful of the bracket height, so that the wheels can properly lift the boat off the ground.
You should also pay attention to width, so the wheels don’t come in the way of your outboard motor. Luckily, most manufacturers will give you instructions on how to do this properly. It’s not a bad idea to test out on dry land first to see if everything’s in place because you don’t want to lose a wheel while you are in the water.
FAQs:
Q: What Is A Boat Launching System?
A: It is a set of wheels that helps you launch your boat and move it from your car down to the water. These wheels are usually permanently installed on the boat and lifted above the waterline once the boat is in the water.
Q: Why Do I Need Boat Launching Wheels?
A: Wheels will enable you to get the boat in the water all by yourself, without dragging it across the ground or needing someone else to assist you. This way you get a bit more freedom and you can get to the water quicker.
Conclusion:
Adding a set of wheels to your boat will make transportation much easier and save you a lot of energy.
Considering that they are easy to install and the price isn’t too high, there’s no reason not to try them out. We hope that our reviews have helped you find a set that fits your boat so that you can enjoy your water adventures even more. Thanks for taking the time to read our Top Best Boat Launching Wheels Review Guide For 2023.
