Best Accessories and Replacement for Pool Heaters Review Guide For 2023

Best Accessories and Replacement for Pool Heaters Review Guide For 2023 – If you ever want to enhance your pool heater experience by adding more accessories or need replacement parts, here are some of the best options. To find out more keep reading our Best Accessories and Replacement for Pool Heaters Review Guide For 2023.

Blue Wave NE6171B Maxi Replacement Pump for Above Ground Pools, 1.5 HP

The Blue Wave Replacement Pump Is made of durable polymer, almost the same great quality that you would see in the best heaters by Hayward and Pentair. It’s a self-priming pump that comes with a clear lid for easy access and cleaning.

While some pumps only have either vertical or horizontal discharges, that’s pump has both and first most of the filter systems.

You will be amazed how quiet this pump is. Moreover, it’s one of the most affordable pumps available on the market. Remember, if you live in California, this pump is not legal for sale in your State.

Product Details:

• Durable polymer construction that resists corrosion; Same quality as Hayward, Sta-Rite and Pentair
• Self-priming pump; Clear lid allows for easy cleaning
• Dual port design for either vertical or horizontal discharge; fits most filter systems
• 110 volt AC with 6-ft cord. Materials: Polyethylene, Plastic
• Not legal for sale in California

Hayward FDXLBKP1930 Bezel and Keypad Assembly Replacement Kit for Hayward Universal H-Series Low NOx Pool Heater

This is a genuine Hayward product ideal for saltwater pool and chemical corrosion resistance. It offers great water velocity to all tubes and can up to 18% by reducing the run time of the pump.

Just like their top of the line heaters, this replacement kit for Hayward Universal H-Series ensures low NOx emissions.

We really liked how easy it is to install it, although you might have some trouble with the rubber gasket, but just a little bit of pushing around will help you get the holes aligned properly.

Remember, that this keypad is only compatible with the 28 inch IDXL2DB1930 display board.

Product Details:

• Make sure this fits by entering your model number.
• Excellent salt water and chemical corrosion resistance
• Same water velocity through all tubes for faster heating
• Up to 18% savings by reducing pump run-time. Low NOx emissions meets clean air quality standards
• Common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
• Recommend that the repair or replacement of components in gas fired, electrically powered devices be performed by a qualified technician for the safety purpose

Pentair 42002-0024S Stack Flue Sensor Replacement Pool and Spa Heater Electrical Systems

If you own a Pentair MasterTemp pool heater and your stack flow sensor breaks, this replacement kit from the manufacturer can be an ideal choice.

However, this can also fit the models SR200, SR333, and SR400 for the Pentair Sta-Rite Max-E-Therm heater system.

Replacing the sensor is really easy, and you can do it yourself. However, remember that this can take a while if you don’t have any prior experience. Only choose the factory OEM parts when you are dealing with Pentair heaters because most other replacement parts might not be compatible.

Product Details:

• Make sure this fits by entering your model number.
• Stack flue sensor replacement
• Fits Pentair MasterTemp pool and spa heater electrical systems
• Also fits Pentair Sta-Rite Max-E-Therm pool and spa heater electrical systems model SR200, SR333, SR400
• Measures 6-inch length by 6-inch height by 6-inch width

Pentair 42001-0053S Electrical Systems Thermistor Replacement Pool and Spa Heater – Amazon’s Choice

If you have either Pentair Sta-Rite Max-E-Therm or MasterTemp electric heater, this is a thermistor replacement you should consider if you ever need one.

Although they rarely ever need to be replaced, when it happens, it can be a pain because your heater will stop working.

Symptoms that you need the thermistor are: you will see the temperature on the heater will start to shoot up to very high level all of a sudden, and the heater will stop turning on.

Fortunately replacing this part is extremely simple and all you have to remove is 3 screws and the appropriate cover. It shouldn’t take you more than 30 minutes, and your heater should be good to go again.

Product Details:

• Make sure this fits by entering your model number.
• Genuine Pentair replacement part
• Fits Pentair Sta-Rite Max-E-Therm pool and spa heaters electrical systems
• Also fits Pentair MasterTemp pool and spa heaters electrical systems

Pentair 42002-0007S Control Board Kit Replacement NA and LP Series Pool/Spa Heater Electrical Systems

If you have any MasterTemp NA and LP or Sta-Rite Max-E-Therm LA and NP series electric heaters, and your control board burns or breaks, this is the replacement you will need.

Replacing the board can be a little intimidating, though it’s not difficult at all. Even someone with limited knowledge of electronics should be able to replace the board in under one hour. Don’t forget to turn the power off before replacing the board.

If you are having trouble replacing it, there are many YouTube videos available to help out.

This is a genuine OEM replacement part and works as good as the original one that comes with your unit. However, before purchasing this equipment, please make sure you call their customer support to confirm that your symptoms confirm a board replacement is required.

Product Details:

• Make sure this fits by entering your model number.
• Control board kit replacement
• Fits Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems
• Also fits Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems
• Measures 6-inch length by 6-inch height by 6-inch width

Hayward IDXLTER1930 Heater Thermistor for H-Series Heater

This is an easy to install thermistor replacement for any H series heaters by Hayward. You’ll need it if your temperature sensor breaks and starts giving an error code.

You can install it within 20 to 30 minutes, even if you have no experience. And yes, it’s reasonably priced as compared to most other replacement thermistors.

It’s ideal to give the customer service a call and make sure this unit is compatible with your heater as it doesn’t fit a couple of H series heaters.

Product Details:

• Make sure this fits by entering your model number.
• IDXLTER1930

Smartpool EQTM2400NA Programmable Timer

This is an amazing little pool pump timer that’s compatible with most pool heaters. You can easily program the time your heater should turn on or off, in 5-hour cycles. We loved the easy, one-touch operation.

The cord is only 2 feet long, which is somewhat short but seems pretty sturdy. However, it might be a little hassle if you want to install it with you pool permanently – a 6-foot cord might have been ideal.

Still, this is an amazing accessory that will let you program the timing of your pool, so it gets warm when you need it automatically and still saves you a few dollars by turning it off when it’s not needed.

Product Details:

• 5 hour cycle options
• One touch operation
• Built in supports for mounting, along with a clear protective cover
• Single 15 amp outlet
• 2′ electric cord
• Power Source Type: Corded Power

Conclusion:

Thanks for taking the time to read our Best Accessories and Replacement for Pool Heaters Review Guide For 2023.